Xinlian

The center of the right-angle fastener is the center position where the right-angle fastener is installed on the scaffold frame tube, and the main node is the connection point of the scaffold pipe cross rod and the longitudinal rod. The scissors diagonal rod should be fixed on the protrusion or bracket of the crossed horizontal rod with rotating fasteners. The distance from the center line of the right angle fastener to the main node cannot exceed 150mm. Right angle fastener knowledge and introduction have good use value in use. Right angle fasteners have safety advantages, quality advantages and brand advantages. This fastener has good product advantages, and the construction fastener manufacturer believes that it can show good advantages during construction.

The lease of steel scaffolding can be assured and hard, and the rental income exceeds that of inferior iron fasteners. Therefore, the good characteristics of this kind of scaffolding fasteners are more widely used in buildings. In order to facilitate the user to use, it can be convenient for the user to operate during use, the working principle is relatively simple, and no complicated procedures are required. Right-angle fasteners are used to fix and connect steel pipes with an outer diameter of 48mm at right angles. The same straight line as all angles. Building fastener manufacturers believe that a variety of fastener materials can be carved cast iron. When using right-angle fasteners, the inner wall arc surface is in full contact with the steel pipe name wall, and then tightened with T-bolts. The torque of the fixing bolt is 40N, which is m.

The right angle fastener has strong anti-slip performance. The anti-skid performance of the steel pipe fastener makes the steel pipe and the fastener in a fit state, and the fit area is large, which overcomes the shortcomings of the point or line of the cast iron fastener and the steel pipe, eliminates the danger of the steel pipe slipping, and ensures the use of the steel pipe. Safety effect. Easy maintenance of right angle fasteners. The fastener itself has the characteristics of not easy to rust and not easy to break, so it is convenient to repair after use, reduce the difficulty of maintenance, save maintenance costs, reduce the manpower and material resources of maintenance, and improve the efficiency and quality of construction. The anti-skid performance of steel pipe fasteners is good, which can overcome the shortcomings of the point or line of cast iron fasteners and steel pipes. The construction fastener manufacturers believe that it can effectively reduce the errors and safety accidents in the construction.

The right-angle fastener has strong deformation resistance. The existing stamping process can only reach the thickness limit of 3.5mm. In actual use, the strength is insufficient, and the limit of easy deformation reaches 5mm, which is 1.5mm larger than the material thickness limit of the existing stamping process. It fully guarantees the deformation and deformation resistance in use, and ensures the safety and repeated use of the product. The anti-deformation ability of fasteners can ensure normal use during construction, and can also be reused frequently to ensure the service life of fasteners and realize the value of steel pipe fasteners.

When using right-angle fasteners, the inner wall arc surface should be in full contact with the steel pipe name wall, and then tighten with T-bolts. The fastener itself is not easy to rust and will not break, so the construction fastener manufacturers believe that it is easy to repair after use, which not only reduces the difficulty of maintenance, but also reduces the maintenance cost, reduces the manpower and material resources of maintenance, and improves the construction efficiency and quality.

The anti-skid performance of right-angle fasteners overcomes the shortcomings of point or line assembly of cast iron fasteners and steel pipes, effectively reduces errors and safety accidents in construction, and ensures deformation and anti-deformation ability in use.