Xinlian

For those who understand construction steel pipe fasteners, especially construction personnel of construction steel pipe fasteners, corrosion is common, so what is the cause of corrosion of construction steel pipe fasteners? What should we pay attention to in the daily storage process?

Most of the causes of corrosion of steel pipe fasteners in buildings are engine overload work, resulting in excessive gaps between steel pipe fasteners in buildings or insufficient cleaning of lubricating oil. In this way, the repeated movement of the construction steel pipe fastener under the cylinder pressure will gradually form cracks and increase, which will easily lead to the corrosion of the construction steel pipe fastener.

Of course, improper storage methods are also one of the important causes of corrosion. Here we introduce three kinds of construction steel pipe fastener storage method:

1. For building fasteners stored in the open air, fasteners with good drainage performance should be selected, and the flat ground should be covered with plastic cloth to avoid rain corrosion;

2. If the building fasteners are damaged, repair and store them in the warehouse;

3. If the storage is not completed, the construction steel pipe fasteners need to be regularly rust-proof and painted to further improve the quality of the construction steel pipe fasteners.

In building construction, building fasteners are widely used, which facilitates the construction operation of construction personnel and greatly shortens the construction period. What good measures can improve the corrosion resistance of steel pipe fasteners and better extend their service life? Here is a brief introduction to Xima Port, hoping to reduce your cost loss.

Generally speaking, the corrosion of steel pipe fasteners is caused by the corrosion of steel pipe fasteners by corrosive substances in water or air. Therefore, it is very important to take measures to prevent corrosion of buildings. Anticorrosion measures can be taken for building steel pipe fasteners through rust inhibitor, using oil. The oil has good flow properties and medium viscosity. Sealing can be done by spraying, dipping and brushing. Complex structural components, easy to use, no pollution, non-toxic, green environmental protection, can well protect the construction of steel pipe fasteners.

Although the construction steel pipe fasteners can reduce the risk factors in the construction process, this is done under normal operation conditions. First introduce the use of building fasteners should pay attention to some of the problems?

The first construction of steel pipe fasteners can not work together from all angles, demolition should also be designed distance. Especially in the absence of a bracket, measurement and planning are carried out in advance. The bracket cannot be removed after all construction steel pipe fasteners are removed, otherwise it will be dangerous.

Secondly, in order to achieve a safe effect, steel pipes and steel pipe fasteners need to be transported and processed safely and effectively to ensure product quality. In addition, the carrying capacity of construction steel pipe fasteners is also different, which requires customers to fully understand their needs before buying, and not to exceed the rated load too much. Scientific treatment of scaffolding and wood connections, to ensure that the building fastener load-bearing. The connection of other components should also depend on the situation, and it is necessary to make connections. Only to ensure the authenticity of the construction steps of building fasteners, in order to better improve its safety performance.