Xinlian

There are many fastener manufacturers. We are specialized in the production and wholesale of scaffolding fasteners for more than ten years and have rich production and sales experience. Steel pipe fastener is a kind of scaffolding, and the quality of fasteners plays a very important role in the safety of construction. Therefore, when we use scaffolding steel pipe fasteners on a daily basis, check the state of the fasteners. The service life of scaffolding fasteners is within 3-5 years. The longer we know the daily maintenance technology, then, the following fastener manufacturers will introduce you to the daily maintenance methods of fasteners!

Daily use and maintenance of fasteners:

1) Used scaffold fasteners (including structural parts) shall be returned to the warehouse immediately and stored by category. When stacking in the open air, the site shall be flat and well drained, pillars shall be set, covered with tarpaulin, and hardware fittings shall be stored indoors.

2) Bended and deformed components should be straightened first, and damaged components should be repaired first, and then stored in the warehouse, otherwise replaced.

3) ordinary suspension scaffold structure parts of rust, rust treatment. Areas with high humidity (above 75%) are painted once a year, usually once every two years. Oil the fasteners. Bolts shall be galvanized to prevent rust. If it is unconditionally galvanized, it should be cleaned with kerosene every time it is used, and then oiled to prevent rust.

4) The fasteners, nuts, plates, latches and other small parts used in the scaffold are easy to lose, so the redundant parts should be recovered and stored in time when the scaffold is used, and the demolition should also be checked in time, and cannot be placed casually.

5) After the tool-type scaffolding (such as portal frame, ceiling frame, hanging basket and support) is dismantled, the maintenance shall be stopped as required and the supporting storage shall be completed.

6) Establish a system of collection, recovery, reflection and filling of vacancies, and implement a limited collection or lease method according to the standard rope of who uses, who makes up the vacancy and who manages it, so as to increase losses and losses.

Fastener manufacturers said that the construction plan should be formulated before the construction of fastener-type steel pipe formwork, and a more strict and thorough construction plan should be formulated. If the plan is not well prepared, unexpected events may occur during construction. Appearance quality requirements for scaffold fasteners. Check the appearance quality of fasteners frequently. It is strictly forbidden to use fasteners with cracks, deformation and bolt slippage; use these unqualified fasteners to prevent engineering failures and accidents. Steel pipe fasteners used for installation of scaffold fastener-type formwork shall be sampled and inspected before use. Sampling check whether the quality and appearance of steel pipe fasteners meet the standards. The sampling quantity shall be carried out in accordance with the relevant provisions, and the sampling inspection shall be carried out according to a certain proportion, and those that have not been inspected or failed to pass the inspection shall not be used.

Regarding the loading capacity of the scaffolding wholesale, the construction load of the working layer meets the design requirements, must not be overloaded, cannot load a certain weight, and the scaffolding must not be connected to the formwork bracket. During the connection, certain treatment is carried out to ensure the reasonable bearing weight of the fastener.

The above is the fastener manufacturers to introduce you to the daily maintenance of fasteners, if you have any questions, please consult our online support. We will do our best to serve you.