To meet the strict requirements of various projects, to ensure the safety of the project, for you to avoid worries!
Quality requirements for cross connection fasteners
Release time:
2019-09-11
Over the years, our company has specialized in producing construction fasteners. With the development and improvement of the industry, we are also making continuous progress. The following is the topic of technical regulations for cross fasteners. There are different concepts. Our company analyzes the relevant views on the technical regulations for fasteners and the appearance quality requirements of cross fasteners.
Over the years, our company has specialized in producing construction fasteners. With the development and improvement of the industry, we are also making continuous progress. The following is the topic of technical regulations for cross fasteners. There are different concepts. Our company analyzes the relevant views on the technical regulations for fasteners and the appearance quality requirements of cross fasteners.
1. It is forbidden to use the cross connection fastener with cracks, deformation or sliding bolt.
2. For steel pipe/cross connecting fastener for erecting formwork support, it is necessary to carry out sampling inspection before use, and the sampling inspection quantity shall be carried out according to relevant rules. Not tested or unqualified shall not be used.
3. It is necessary to set up a horizontal rod at the main node, which is buckled with right-angle cross connecting fasteners and is prohibited from being removed. The middle distance between the two right-angle cross connecting fasteners of the main node shall not be greater than mm.
4. The following rules shall be met when unloading. It is forbidden to throw the steel pipe \cross connection fastener from high place to the ground
Key words:
Previous article
Next article
Previous article
Next article
recommend reading
2022-05-16 14:30
2022-04-29 09:18
