To meet the strict requirements of various projects, to ensure the safety of the project, for you to avoid worries!
Accessories
The center of the rotating fastener refers to the central position where the rotating fastener is installed on the scaffold frame pipe, and the main node refers to the connection point between the cross bar and the vertical bar of the scaffold pipe. Rotating fastener is used for connecting parallel or oblique crossing rods. Scissors oblique rods shall be fixed on the protruding end or vertical rod of intersecting transverse horizontal rods with rotating fastener. The distance from the center line of rotating fastener to the main node shall not be greater than 150mm. Both ends of flat-shaped and open-shaped double-row scaffolds shall be provided with transverse diagonal braces, and one in the middle shall be provided every 6 spans. The longitudinal overlapping length shall not be less than 1 m, and 3 rotating fasteners shall be arranged at equal intervals for fixation. The distance from the edge of the cover plate of the end fastener to the end of the overlapping longitudinal horizontal rod shall not be less than 100mm.
Key words:
Product Classification:
Product Details
The center of the rotating fastener refers to the central position where the rotating fastener is installed on the scaffold frame pipe, and the main node refers to the connection point between the cross bar and the vertical bar of the scaffold pipe. Rotating fastener is used for connecting parallel or oblique crossing rods. Scissors oblique rods shall be fixed on the protruding end or vertical rod of intersecting transverse horizontal rods with rotating fastener. The distance from the center line of rotating fastener to the main node shall not be greater than 150mm. Both ends of flat-shaped and open-shaped double-row scaffolds shall be provided with transverse diagonal braces, and one in the middle shall be provided every 6 spans. The longitudinal overlapping length shall not be less than 1 m, and 3 rotating fasteners shall be arranged at equal intervals for fixation. The distance from the edge of the cover plate of the end fastener to the end of the overlapping longitudinal horizontal rod shall not be less than 100mm.
ONLINE MESSAGE
* Note: Please be sure to fill in the information accurately and keep the communication unblocked. We will get in touch with you as soon as possible.
